Filtration
Contamination control of lubricant and hydraulic fluid
Optimizing the operation
by the contamination control of lubricant and hydraulic fluid.
Prevent the mechanical problems
by contamination, achieve planned operation.
- Prevention of machine trouble
- Improvement of operation rates
- Extend the remaining life of machine
- Reduce the maintenance cost
- Delay the interval of oil replacing
- Less volume of drain oil
- Cut the purchase cost of new oil
- When the new oil supplied through the filter,
the operation can start in more cleanliness condition.
Our service is available from production of filter to implementation of filter operation. We support your contamination control activity.
Example: the process of contamination control by filtration
High-Performance Filter
Production and Sales of high-performance filter
The filter is designed and manufactured according to
the installation requirements such as the size of target
machines, processing capacity of the oil volume and
the place to set et, al.
A permanent type filter is also available with design,
production and installation.
Detergent-Dispersant
Preventing malfunction of machines
The sludges in oil is to be dissolved and dispersed by injecting of Detergent-Dispersant “TS-604”
Once the sludges dissolved from the metal surface, it should not adhere again.
The oil had been injected to the TS-604 is available to use without any change.
More effect is expected when injecting of TS-604 is carried out at the same time of filtration.
Model case: Injection activity of Detergent-Dispersant "TS-604"
